11 Measures to Spray Paint Your Car Like the Professionals - Car Bodywork Paint Repair

11 Steps to Spray Paint Your Car Like the Professionals - Automobile Bodywork Paint Repair

You'll be surprised to see only the way to spray car paint actually can be easy. That does not mean that you can only grab a tin of paint and go at it. There are some basics you need to know. Both in the preparation and application.

Step A:

Prepare by gathering all your items that you're going to need.

Step B:

You will have to examine the car for any rough spots. This will smooth out the rough spots. In addition, it lets the spray auto paint to adhere better. Once you have finished sanding, make sure all the dust dirt and debris are taken off the vehicle. It's imperative the automobile be totally clean.

Step C:

This will make sure you get an overall even coat of your coloured paint plus helps the paint to adhere well. When you spray the primer, be sure to apply light layers and allow for drying in between. How to spray auto paint requires a little getting used to.

Step D:

Now you might be well to the point where you are about ready to spray the shade. You may have determined to use the spray auto paint that comes in aerosol cans, or perhaps you might have selected for the spray gun. In any case, make several practice strokes on an object before you begin with the auto. After you might be ready, start the passes with the paint without reluctance. If you hold gun or the spray can in one spot, you'll end up with uneven coverage and potentially the paint will run. If this happens you've got a major repair job on your had. You'll most probably have directions as to how to spray on auto paint using the equipment or spray cans.

Step E:

It's up to you whether you need to wet sand between coats of colour and primer paints. You might want to study this alternative on the web, or check with someone that's familiar with how to spray on car paint

Step F:

Once you're absolutely satisfied with the color, you are down to the finishing touches. You will now need to apply several clear coats. This can give the finished and gloss look to the automobile along with protect the finish. Probably two layers will be sufficient but it will be up to you. Make absolutely sure it truly is dry in between coats.



Step G:

Yet again, you've the alternative of wet sanding if you favor. Again, I will suggest you request the guidance of individuals that are comfortable with the way to paint a car. You need with the following grits in this sequence if you decide to follow this step then. Use 800, 1000, 1200, 1500 and the finally the 2000. This will remove spots that'll be overly heavy in the clear coating application.

Step H:

Step I:

You should now buff the surface. To try this simply use a moderate cut polish. You should have a perfect glassy look to Alloy Wheel Refurb Enfield the finish once you have done this.

Step J:

As a final touch, you may want to apply a couple of layers of wax.